$3,795.00 – $5,145.00
The PVS-14 is the all around best multi-functional night vision monocular available. Head or helmet mounted, the PVS-14 allows the user to retain their night adapted vision in one eye while viewing their surroundings through the illuminated eyepiece of the PVS-14. The new battery housing completes the perfect package by allowing the user to power off the unit when in an upright position and power on when flipped down. Another strength is its ability to be weapon mounted behind most collimated daylight aimers and Reflex sights.
This allows the user the ability to use their PVS-14 both as a night vision monocular for increased mobility and tactical awareness and as a short range weaponsight. Gain control gives the user the ability to increase or decrease the tube gain. Under extremely dark conditions, gain control allows the user to adjust the gain upward, giving a better image. Under high light conditions, details can be washed out due to an excess of light. Lowering the system gain can allow those details to be better seen. Additional features of the PVS-14 include an infrared LED with LED indicator and a low battery indicator.
The VYPER 14-C rugged replacement chassis features 44G resin and a single mount for use in monocular applications. It upgrades the PVS-14, providing superior tube retention and reinforced junctures.
The VYPER-14 rugged replacement chassis features 44G resin and a dual mount for use as a weapon sight, monocular or collimated goggle. It upgrades the PVS-14, providing superior tube retention and reinforced junctures.
The Chassis may look somewhat similar to a legacy PVS-14 housing, but that’s where it ends. The Vyper-14’s design improvements span the entirety of the chassis including the objective bore structure, objective bore threads, objective lens retaining ring, helmet and weapon mounting systems, gasket channel, battery compartment screw holes, IR illuminator and light sensor widow, multiple other interior and exterior surfaces, and the list goes on. The Vyper-14 C Chassis features all of the improvements of the Vyper-14 without the obverse hard shoe mounting point.
These meaningful improvements were all engineered to maintain physical mass while increasing chassis impact resistance, image tube stability, and sheer surface strength. This makes the Vyper-14 is a worthy upgrade for any PVS-14.
DECREASED SURFACE COMPROMISE RISK
The entire chassis is made of ultra-rugged fiberglass reinforced tried-and-true Ultem resin. This lightweight material is nearly indestructible which is why fiberglass reinforced Ultem is the go-to material for many military grade lasers and personal vision systems. The windows for the IR illuminator and light sensor have a decreased radius and are thicker than a legacy housing. This design does not effect the function of the electronics, but does dramatically increase the strength of the windows and surrounding housing.
IMAGE TUBE PROTECTION
The Vyper-14 integrates with virtually any image tube, interface hardware, or furniture design architecture making is a solid foundation for the most modular applications. These integrations significantly improve image tube protection and positioning coupled with the ability to modernize the system with accessories and high yield optical trains.
All exterior corners of the Vyper-14 are filleted for additional support and the Vyper-14 is also twice as thick as a legacy PVS-14 housing where the thread relief meets the body. The improved exo-skeleton allows for enhanced optical augmentation, expanded environmental, operational protection, and life-cycle increase.
LOGISTICAL EASE IN MAINTENANCE
The Vyper-14 objective bore features a “Burk Ring” for easy removal of the objective lens which translates to added logistical ease in maintenance. The Burk Ring, named after the designer, is an external stop system that allows the objective lens housing to be changed without dissembling the entire monocular. To remove the objective lens assembly on a legacy PVS-14 system you have to remove the battery housing, eye piece assembly, tube retainer ring, light pipe, image tube, and close focus stop ring.
THREAD SURFACE INCREASE
Thread material from a cross-threaded tube retainer ring is one of the most common sources of debris between the eye piece and image intensifier on a legacy PVS-14. The thread surfaces on the Vyper-14 are uninterrupted and machined with more thread surface.
Comparing the Vyper to a legacy housing we immediately noticed 2 additional levels of threads for the objective lens assembly which provide better concentricity and lens stability while focusing objective lens. The increased thread surface/stability in the objective bore makes the Vyper-14 submersion tolerant and offers better optics support. The chassis is still 100% compatible with legacy optics.
DUAL SIDED INTERFACE POINTS
One of the most notable additions to the Vyper-14 are the 2 mounting positions for RQE dovetail shoes. The mounting points are reinforced and are the only shoes that make a PVS-14 TRULY ambidextrous. The RQE shoes are offset appropriately for the right and left side and feature a patented “tolerance tooth” so that the shoe will always fit any helmet or weapon mount snugly. The Vyper-14 still has the standard 1/4-20 mounting hole to maintain legacy PVS-14 accessory compatibility, but after we tried the RQE shoes we don’t see any reason to go back.
The DEP ETHER eyepiece provides a larger, more forgiving eyebox than provided with most standard-issue NVDs. It can provide up to 30% weight reduction, significantly reducing head and neck fatigue when head worn.
Field of View 40 degrees
Minimum Focus Distance 25 cm
Eye Relief 25 mm
Diopter Adjustment -2 to +2
|Field of View||40˚|
|Magnification||one power (1X)|
|Diopter Adjustment||-6 to +2 Diopters|
|Objective Lens||27mm, f/1.2|
|Focus Range||9.8″ to infinity|
|Power Source||1 AA-Size Battery|
|Operation Time||50+ hours|
|Weight (w/o batteries)||12.5 oz (355 g)|
|Size||4.5″L x 2.5″W x 2.75″H|
|Spot Size (inches)||Zone 1||Zone 2||Zone 3|
|>0.009 to 0.012||0||0||0|
|>0.006 to 0.009||0||1||1|
|>0.003 to 0.006||0||2||2|
|Dimensions||15 × 10 × 6 in|
L3 White Phosphorous, L3 Green Phosphorus, 4G Intens White Phosphorus
Mil Spec, Vyper-C, Vyper
Mil Spec, Ether Eyepiece